Mini Heart Shelf

Watch the entire process here:

A mini heart shelf! A perfect gift for anyone for valentines day, it uses roughly 500 grams of filament with 3 walls. 

Recommended print settings: 
3-4 walls 
PETG

10% infill (I used grid) 

THERE ARE TWO VERSIONS:
- MK4S/MK3S+
- P1P/P1S/X1C 

Please make sure to print the right version for your printer! The Prusa Mini / A1 mini printers will need the model sliced into smaller pieces. 

The “Hole Fillers” are used to cover screw holes. The small thin ones cover the hole if a screw is in the hole itself, and the larger thicker hole covers fill the void if no screw is in use so you can print the larger ones, fill the holes, and then hang on the wall with command strips if you don't want to use screws. 

The screw holes  fit EZ Anchor dry wall screws at the default sizes.

I would suggest printing the screw_test_fit piece, or splitting the model in your slicer to isolate one screw hole so you can test if it fits your screws. You can also cover those holes with a cylinder in the slicer as a positive part or use the hole fillers, then print on a smooth build plate to use command strips to mount to the wall or add your own keyhole negative or screw hole negative to attach to the wall in your preferred method.