Skirting Board Cable Holder

Quick easy print. Use multiple to bridge longer distances.

Works best for screw-in skirting boards, and in older houses (where you need to lay extension cords most often anyways.)

My application is for power cords because theres not enough sockets in my apartment. Can be sized down for smaller cables.

Insert Cable into the hook and then the flat part into the small gap between skirting board and wall. If printed translucent or white it's almost invisible. Depending on the gap it can be easy or hard to insert, and in some cases even fall out. Can almost always be solved by routing the cable so it doesnt want to go up. The more you use, the “cleaner” it looks.