Saturn 3 Ultra Magnetic Vent Adapter for 4" Dryer Vent Hose/Duct

This is a remix of https://www.thingiverse.com/thing:6408339

It consists of 3 parts (plus a cap) and will allow you to create a magnetic connection for a 4" dryer vent hose/duct to your Saturn 3 Ultra.

Required parts for just this print:

• 4x M3 brass inserts (M3x5.7
• 4x 12mm M3 screws
• 8-24x 6mm x 2mm N52 Round Disc Magnetics

The parts I used for my Ventilation System include:

• https://www.amazon.com/dp/B0CNVSRN2Y
• https://www.amazon.com/dp/B09MVG2DT8
• https://www.amazon.com/dp/B0C7Z82L7P NOTE: the silver hose that comes with the window kit is non-standard and will NOT fit on the inline fan or 3D printed adapter. The black hose works great. I cut the black hose and used hose clamps to install the fan inline.

The original used a separate 3" to 4" adapter and 4" dryer vent hose adapter to convert the Saturn 3 Ultra's vent port to the 4" dryer vent hose.

I combined the two parts into one creating a single component that will magnetize to magnet plate bolted to the Saturn 3 Ultra.

I also converted the 6mm x 3mm magnet holes to 6mm x 2mm magnet holes.

Print Settings

Printer Brand:

Bambulabs

Printer:

**Rafts:**

No

Supports:

**Resolution:**

0.4mm

Infill:

**Filament:** Duramic PLA+ Grey

Category: 3D Printer Accessories