Small 3" speakers (Visaton FRS 8)

Small 3" speakers model (made from wood pla), Designed in hornresp for Visaton FRS 8 4 ohm driver. For best sound use self adhesive acoustic felt on walls and fill space with damping material also print with 40% and more infill. You can run cable through bassreflex, its just fine. For mounting driver and back you need M3 (5mm is ok) heat inserts. About printing, i cut them in 150mm from back and then glued parts (use brim or print slow).

btw. dont expect good bass response. For better bass you need dsp or just eq (+6dB 80hz). My eq settings in photos