Cajon Microphone Holder - Mikrofon-Halter für Cajon V2

The model allows to mount a microphone at the hole of a Cajon. The holder has a mounting position for.

Due to the long arms, there is a support ring, that stiffens the arms.

I attached felt gliders at the claws (see pictures) to get a better decoupling between Cajon and mic.

I designed the holder for a Cajon-hole for different hole diameters. If you need another diameter, let me know, and I will try to make another version. Also if you need another length of the protruding arms, I can change this.

Updated version:

Inspired by a comment, it created an update of the Cajon mic holder.

• The length of the threaded part is increased.

• Guide for the position of the ring.

• Protection against easy loosening of the ring

• Support element to avoid slicer supports.

The support element is a feature, not a bug. It's not necessary to activate any supports in the slicer. The included support element can be removed very easily after the print.

See pictures for all improvements.

The pictures shows the version without improvements (yellow filament) and the new version with improvements (black filament).

There are versions for different hole diameters. The ring element is the same for both diameters.

120 mm was printed and tested in practice. 150 mm + 112 mm + 115mm is only available as a model due to the lack of a suitable instrument.

Please comment, if other diameters are wanted.

2026-01-19: Added more diameters.

2026-02-05: Added 115mm