Halo Master Chief Bust Statue

A bust of Master Chief from Halo. Comes in 3 separate pieces so multi-color printers are not needed.

The model features the Halo Infinite Master Chief, ripped from the game and model can be found on Steam Workshop. The Halo Ring model was made by Jonathan Bédard @JOBs3Done on MyMiniFactory.

Supports are required, and due to the complex geometry on Chief, please be careful when removing the tree supports.

I used;

Bust: 0.12mm layers, 3 walls, 10% infill, automatic tree supports at 20 degrees

Stand: 0.2mm layers, 4 walls, 15% infill, manual tree supports for the bottom of the upper ¾ of the ring

Visor: 0.08mm layers, 2 walls, 15% infill, automatic normal supports at 15 degrees

Please note, if the visor doesn't fit properly into the bust, there is a loose and a tight version.