Crucarta Backspacer PM2 - Flush
Modified backspacer for the Crucarta PM2. The crucarta variant has different liners and scales, so this fills the gap!
3
21
0
149
updated
February 10, 2025
Description
PDFModified backspacer for the Crucarta PM2. The crucarta variant has different liners and scales, so this fills the gap in between where the liners are cut out. This was printed in PLA, but you can use almost any material as this is not a high wear item. This is a snug fit item, make sure that you fidget with it when installed to get everything totally flush!
Printed at .12 layer height with a .4 nozzle. I would use this or lower, not anything higher.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Has a raised lip to cover the gap in the crucarta scales for the Pm2. Lengthened and added filler piece.