Credit Card Phone Holder ( Print In Place ) Maywork V.2

Yap section :

So i finnally brought myself to make the V.2 a reality. Yet again it is inpired by this model : https://www.thingiverse.com/thing:5424800 )  where i tried to remake it with real hinges. It can hold the phone well both horizontally and vertically. As far as printing goes having a precise printer with good part cooling should make printing this a breeze, otherwise opening the stand for the first time might prove a bit difficult. I would also strongly suggest making it multicoloured like in the pics for the added esthetics.

I quite liked how the V.1 turned out but it had its fair share of issues and so i was set to remedy them in V.2 . I rather pleased with the results however i can already think of more things to tweak for the next itteration. When there is V.3 its probbably going to be an attempt at a completly different mechanism to make the holder even thinner.

I also included a “Lite” version wich just has some fancy purely decorational slits, versions without text and a .step file of the Lite with text for those who would like to remix it for some reason. 

Changes from previous version :

• Model was made slightly thinner, ( from 3 mm to 2,5 mm ) because size matters.
• Removed grid on the bottom side, making the holder much easier to open the first time while allowing it to be opened on either side.
• Redesigned hinges, making them less finicky to print and making them stronger.
• Redesigned agle adjustment mechanism, making it slightly more reliable.
• Made the phone rest flap latch in a closed position.

Recommended print settings :

• Supports :       NO
• Brim :              NO
• Infill :               Anything above 10%
• Layer height : The thinner thr better, i'd suggest around 0,16mm 
• Material :       ( Probbably anything, mabye besides Silk PLA ) PLA, PLA+ , PETG, ABS 

In case of any issues, or if you have any design reccomendations please do let me know. Im always working on another version.