Insert/Organizer for Forgotten Waters

An organizer for the game Forgotten Waters. Sized for cards with or without sleeves.

Print Instructions

Print with 0.4 or 0.6 mm nozzle, 0.3 mm layer height, 15% gyroid infill, no supports.  I strongly recommend using a brim for the spacers, to avoid warping. Print x numbers of card dividers as you see fit.

Assembly Instructions

The large spacer that also doubles to hold the boards is too big to fit onto a Mk3S, so I broke it into two parts.  Place the spacers first, then put the component boxes on top. The photos show where everything goes.

If you like what I'm doing…

 … consider buying me a coffee or joining my Club.