BrewPiLess enclosure for Wemo board w/ LEDs

OpenSCAD enclosure model for BrewPiLess_2.1 boards by Filippo Ceraulo, selected for its slim profile and use of D1mini or Lolin wemos.

The model accounts for 3 probe inserts fitting GX12 connectors (use caps or flaps to protect them from spalshes), 2 power outlets and a sector C14 inlet.

Ventilation notches can be removed in the source to limit exposure from splashes, as well as a rear hanging notch. Print in ABS or ASA (as pictured) as relays car