Z Orbiter v2.0 Extruder for Original Prusa, Zaribo, Bear Mods.
Description
PDFUpdate: 11th Sep 2023 ** Bodies updated for less-shrink materials (Non-ASA/ABS)
Update: 8th Apr 2023 ** LED Filament Sensor Cover updated for easy retraction
Update: 15th Aug 2022 ** Extruder covers are updated for a better square nut insert.
Update: 22nd May 2022 ** FS Ball Holder design improved for smooth filament entrance.
Update 16th Mar, 22 ** Bear X Carriage added.
Update 14th Mar, 22 ** PTFE Tube Cutters for different Hotends added.
Update 25th Feb, 22 ** Dragon HF hotend Rigid Mount Body and Cover added.
Compatible with E3D V6, REVO 6, Dragon HF, Dragon Rigid Mount
Full ZOrbiter 2.0 Kit (Select Hotend Type)
Orbiter v2 Motor with Dupont Rambo Board connector
Sunon Extruder Fan
ZOrbiter v2.0 is very similar to its predecessor. Robert, who is the designer of Orbiter Motors did some improvements with the help of the feedback collected from the community and released v2.0 so did I. Please check the Orbiter Project Website for further information about Orbiter motors and variations.
You will need a 12mm and a 38.5mm PTFE Tube (OD: 4mm, ID: 2mm) for this mod for the E3D V6 hotend. (The stock E3D V6 for MK3 comes with a 43.5mm PTFE) Dragon Rigid Mount PTFE is 23.50mm, Revo 6 PTFE is 26mm. PTFE Tube helper added for all sizes. Please check the assembly instructions.
ZOrbiter v1.5 is printing perfectly fine and one shouldn't expect a difference in print results with the ZOrbiter v2.0. I am a maker like you and I don't want anyone to spend their hard-earned money on something which is not really needed.
However, the new Orbiter v2 Motor approx. 5mm shorter than v1.5 and slightly lighter. So lighter and smaller is always better for higher speeds.
Assembly Instructions (Please refer to your printer manual for extruder assembly if you have never assembled the printer before)
Links:
Tags
Model origin
The author marked this model as their own original creation.
