Drying rack side weld endpiece fix

Fix for when spotweld of the side is broken.
*V1 cannot be folded back together*

Printed in petg layerheight 0.2, adaptive layer height
Orientation according to 3mf file

Hardware:
M3x9 Socket Cap (or longer) (M3x6 for V1)
M3 hex nut

Dimensions:
Thick end tube: 16.4mm
Thin end rod: 4.2mm
Slat: 3.4mm

Assembly:

Take end cap off and slide the retainer off
Enlarge slat hole with drill or heat slat to ensure snug fit
Push the thin end rod in and tighten the screw
Assemble back together

V1:
Push nut in or pull in with screw
Assemble first according to photo
Then slide on thin rod
Lastly Slide on thick tube, tighten screw, and apply end cap