Gokou Ruri 1/8 Figure Base

Base for this Gokou Ruri figure.

The original base had a laced pattern on it so I added a similar pattern made by 
awie08 over on vecteezy.com. There are two versions one where the pattern is raised and another where it's sunk into the base. There's also a plain one.

This requires 2.5mm and 3mm metal rods. I purchased them on amazon and cut them using a dremel.

The rods need to be cut to the following sizes.

Right Foot:
Heel - 3mm - 1 x 13.5mm
Toes - 2.5mm - 1 x 10.5mm

Left Foot
2.5mm - 1 x 10mm