Voron V0 Kirigami Build Plate in ORCASLICER

How to add THIS to ORCASLICER

This one is mostly for FUN and to Show that SWEET Kirigami build plate setup in your slicer.

First download the STL provided

Open OrcaSlicer

In the Printer section click on the “Printer Settings” button

In the Options window click on the “set” button

In this window you can set the print bed area, a custom graphic to display on your build plate, or change the build plate model.

We are going to change the “Model”



Click “Load” and navigate to where you want to keep the STL.



Click “OK” and your all set!



At any point after this if you would rather have the Original Build Plate, Navigate back to where you loaded the model in and click “Remove” and then “OK” and OrcaSlicer will revert back to the Original.

I hope you enjoy this little bit of extra fun!

Combined the two CAD drawings to make a full build up of the Kirigami Bed Frame, Printed parts and Build plate.