Kiss Candy Vending Machine, no supports, print in place

Kit to build a vending machine for Hershey's Kisses, easy assembly. Takes nickels, quarters, and 20 Euro Cent coins.

• 0.20mm layer height
• 0.40mm nozzle
• 15% infill
• no supports

Print all parts together or separately. Snap out the wall support, shown already missing in figure A. It's only 8x15mm as seen in figure B. Insert the latch arm into the coin slot (figure C) and let it rest in position (figure D). Insert the door into the coin slot with the door tab pointing up. The counterbalance weight slot will face towards the top (figure E). Insert the rod through the bearings, door arm, and latch arm (figure F) put a penny or 2 euro cent coin into the counterbalance slot on the door arm (figure G). Load with candy and enjoy! 

The rod is quite loose for ease of assembly, I put a little dab of adhesive on the bearing and rod. Be careful not to glue the arms!

I know our European friends don't like Hershey's Kisses. Please suggest a candy that will work for this machine. The opening in the drawer is about 23mm deep. I also included BLANK body and lid so that you can personalize or write in your language.