Tool Holders

Screwdriver holders
 

Part 1 holds a three pack of Picquic™ screwdrivers

1. SIXPAC Plus™ - through hole - 0.525"
2. Multique™ - through hole - 0.375"
3. Teeny Turner™- through hole - 0.375"

Part 2 holds 2 generic screwdrivers and a caliper

1. Through holes for screwdrivers are 0.45"
2. Insize™ 8" digital caliper series 1102

Both parts mount to wall with #8 wood screws (or whatever you like)

Print Information (PrusaSlicer)

Printer: Voxelab Aquila X2

Filament: Overture 1.75mm PLA

Layer height: 0.16mm first layer/0.2mm remaining layers

Infill: 10% Honeycomb

Brim: 5mm (probably not required)

Supports: Build plate only

3d Model Link 

Use the above link to open the models in OnShape and adjust the models to suit your individual needs/wants