Voron 0.2 Rear Panel 8015 Fan Cover Flat

To ensure that the 8015 fan and the hinged coil holder from Kai_277323 (https://www.printables.com/model/311233-voron-01-foldable-spool-holder) each protrude by 10 mm, I came up with this fan cover, which allows the 8015 fan to be recessed into the rear panel. So it would also be possible to install deeper fans like 8020, ... without them protruding unnecessarily far out of the rear panel.
I also used the following items for mounting:
- 4x standard self-tapping screws for fans
- 4x M3x10 screws
- 4x M3 nuts
- 4x M3 washers

The VORON 0.2 Lower Rear Panel from Artxime served as the design template. I cut everything out on my CNC milling machine.

Only the cut-out for the 80x80mm fan has been changed. This was moved slightly in its position. It is also a rectangular cut-out so that the fan fits in exactly. In addition, there are four drill holes so that the self-designed fan cover can be screwed on.