Ac Milan - Pippo Inzaghi - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 121x170mm in size
 

Filaments Used:
PLA+ Sunlu Black 
PLA+ Sunlu Red 
PLA+ Sunlu Gold 
PLA+ Sunlu Silver 
PLA+ Sunlu White 
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #19 (1.6mm) swap to Gold
At layer #24 (2mm) swap to Silver
At layer #25 (2.08mm) swap to White for the rest.