Ocean Wildlife Fridge Magnets

• 🌊🐙 Looking for a way to bring the ocean’s beauty into your home? These fridge magnets feature bold, minimal designs of iconic sea creatures.
• 🏠 Perfect for your fridge, whiteboard, or any magnetic surface adding a touch of the ocean to your home or workspace.
• 🧲 Designed with built-in slots, allowing you to insert magnets during printing for a seamless finish.
• 👶 Easy to Print: No need for (AMS) or (MMU). Only two manual filament swaps are needed to complete the model.

Technical Specifications:

• 📏 Size: 5 cm
• 🔧 Print Settings:
  • Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
• 🧲 Magnets:
  • Requires 4 magnets (6x2mm) per model.
    • A fifth slot is included for extra strength if needed.
• 🌈 Color Changes:
  • Start with Black (Esun Matte Black)
  • Pause At layer #36 (2.96 mm), insert the Magnets.
  • At layer #52 (4.24 mm), switch to Gray (Esun Gray)
  • At layer #64 (5.20 mm), change to White for the rest. (Esun Matte White)
• 📋 Assembly and Usage Tips:
  • Alternatively, use our ready-to-print 3MF file to automate these steps.
  • Don’t simplify the model and ignore the "floating regions" warning.
  • Ensure all magnets face the same direction for proper alignment.
  • If you encounter stringing issues, you can use a heat gun to remove them.