P1S 3kg Spool Holder

Simple spool holder to fit bigger 3kg spools, basically the stock spool holder extended. It will bend a little bit when a full 3kg spool is on it, this is normal. You can also fit 2 1kg spools on it.

I have used this for ~2 years, there is wear and tear but I think it will hold up for many years to come.

Print settings:

• Filament of your choice (I used PLA)
• 40% infill
• 4 walls
• 4 top/bottom layers
• supports needed

Required Hardware:

• x2 M3x20 screws