LG LSD4913ST Oven Selector Knob Stem

A replacement part for the mode selector knob stem on the LG LSD4913ST dual fuel range. Despite all of the other knob stems being made of metal, the mode selector knob for the oven had a stem made of brittle plastic, which can snap if you even so much as lean on it wrong.

It's all once piece all the way down to the selector microswitch, so if it breaks, the whole thing has to be replaced. That's what this model is for.

I'd recommend printing it in ABS or some other higher temperature filament, though I'm sure PLA would work fine since this part of the stove should not be getting particularly warm.

I don't recommend using any infill on this model, especially on the stem. You'll want to use at least 3 walls, possibly more.