Heart Lamp

2 body version:
- No hole
- with a 12mm hole for a DC jack

2 Lid version:
- A version to use with 2 M3 threaded insert
- A version to screw directly in the plastic.

To assemble, you need 2 M3 button screw 20mm.

Printing Information (easy to print)

For the Body

NO SUPPORTS NEEDED

Flat on the bed

Layers and perimeters

• Layer Height 0.2 mm
• 4 perimeters

Skirt and Brim

• Outer brim only - 5mm (I use a brim because of the sharp corner)

-----------------------------

For the Lid

NO SUPPORTS NEEDED

Flat on the bed

Layers and perimeters

• Layer Height 0.2 mm
• 5 bottom layer
• 4 perimeters

Infill

• Bottom fill Pattern - Hibert Curve

Skirt and Brim

• Outer brim only - 5mm (I use a brim because of the sharp corner)

Please let me know if you want me to add or improuve something :)