Miniature heart decorative piece or lamp cover. This time I only provide the cover :)
The heart once modeled is hollowed and then sliced so that there are no perimeters (top, bottom and minimum perimeters are set to 0). Also, I had to make a little stand on the bottom so that it can be printed and added modifier so that the base have perimeters.
Print settings:
You can play with different infills but in my opinion the gyroid looks the best. If you are unsure how to do this you can use my g-code. Scale it to your desire. I have chosen this size because of the stand.
As for the stand with LEDs, I have used an old decorative lamp similar to this. I have removed the cage and the bulb unscrews and you have a nice base with LEDs which are connected with steel wire so that you can bend it and shape it. Very nice for tinkering and trying out designs for lamps :)
Any suggestions are appreciated.
The author marked this model as their own original creation.