Škoda center wheel cap

I downloaded the model from Makerworld, but my first print of the center wheel cap sank deeper into the car's wheel than I wanted. So, I adjusted the thickness and, since I print on a Prusa Mini, I added the logo as a separate part to enable dual-color printing. I printed 4 perimeters (the logo only two) with PETG, 30% honeycomb infill, and a 0.15mm layer height (0.2mm would suffice).

I used the model by o.vavra and modified the thickness of the upper part. I also separated the logo as an individual part to allow for dual-color printing using a single extruder.