Adjustable Cubicle Coat Hook
Includes clamping fastener for various wall thicknesses!
12
67
1
234
updated
October 29, 2025
Description
PDFRecommended print settings:
- Material: PLA or PETG
- Layer Height: 0.2 mm or less
- Infill % : 15+
- Supports: Yes, for holes
- Support Type: Organic/Tree Supports
- Print Orientation: Default as modeled
- Raft: Optional
- Brim: Optional
The fastener can be tight, you can add some graphite for lubricant, or scale it down a few percent. It starts to work easier with use.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Added a threaded hole (M12 x1.75) and a bolt to allow for different cubicle wall thicknesses!
Changes highlighted:
