RGBtoHDMI LumaCode Case for c0pperdragon's "RGBtoHDMI Mono & LumaCode"

This is a case designed for c0pperdragon's RGBtoHDMI Mono & LumaCode. It holds both the RGBtoHDMI board and Raspberry Pi Zero. This is a remix of djos_1475's design. https://www.printables.com/model/92380-rgbtohdmi-case. The main change for this remix is modifying the video input hole to fit c0pperdragon's cable for his RGBtoHDMI board https://www.tindie.com/products/c0pperdragon/rgbtohdmi-mono-lumacode/. I also tightened up the holes around the ports, made the Micro SD card slightly easier to remove, added material between the two Micro-USB ports, and added the text “PWR” next to the right Micro-USB port. Two M2.5 screws are needed to mount the Raspberry Pi Zero to the case, and two 11mm standoffs (also M2.5 if they are threaded) are needed to help support the RGBtoHDMI board when connected to the Pi Zero.

Replaced hole for input with one that better fits the cable for c0pperdragon's RGBtoHDMI Mono & LumaCode. Tightened up holes for Micro-USB, Mini HDMI, and Micro SD card. Added a piece between the two Micro-USB ports. Added “PWR” text next to the right Micro-USB port to indicate which of the two Micro-USB ports is for power. Extended the indent around the Micro SD card to make it slightly easier to remove.