Mini low poly heart keychain

Small hearth keychain to giveaway for valentines day!

Takes only 12 minutes to print. 

Print settings:

• 0.15 mm QUALITY
• Filament: PLA 
• 15% Grid infill
• 0.4 mm nozzle

There are 2 models. One with added heart cut out in the middle and one without. Also, I made a few variations with visible infill. You can play with it for different designs by changing infill density and infill types. I have tested it with PolyTerra PLA and the hook is rigid won't brake easily.  Can make other variants if enough people will be interested.