HDZero Quest 3 Headband Adapter

Take the weight off your nose and reduce the “face hugging” of your HDZero goggles by fitting a Quest 3 VR headband. The choice of headbands is extensive, and most all provide better comfort and support of the goggles than the provided elastic band. This becomes increasingly important as the weight of the goggles increases when using bigger more heavy antennas and/or other VRX modules.

These adapters have been meticulously designed and tested to fit a Quest 3 headband securely with minor modification (a template piece is supplied to facilitate in the cutting and drilling of the headband clips). The RHS adapter incorporates a cable clip to support the power cable and reduce drag on the goggle/VRX connectors, and the LHS adapter has a cover plate that can be removed to allow the use of the module bay for either Wifi or Analog modules.

You will need to complete:

4 x M3x10mm countersink bolts.

2 x M3x12mm cheesehead or socket cap bolts. 

2 x M3x8mm cheesehead or socket cap bolts.

6 x M3 Nuts.