Gravity Hidden Blade w. Print in Place locking mechanism

This is a Gravity, or motion, deployed Hidden Blade. Inspired, obviously, by Assassin's Creed. Printed at 0.15 mm Layer hight, 15% infill, 3 walls, and in PLA. You will need support for the locking tab at the front of the main housing. I would recommend using a brim for the blade and cover. Inside and outside brim for the cover. Very simple action and locking tab. Welcome to the Brotherhood. <)

Update: 2-8-25

The main housing with tab should probably be printed in PETG to make sure that the tab can flex without snapping, or you can print the tab in TPU and then attach it to the main housing.