Camera mount for MK3/MK3S

This mount is designed for the Nexigo 1080p PC camera. It should work for the Logitch c920 as well. The length of the part is perfect to produce the best focus while framing the entire print bed.

The part connects to the T-slot frame of the printer at the very front of the printer. It should work on the left or right.

I left the top hole small to allow drilling up to whatever size is needed for connecting any camera. However, the Nexigo camera comes with a tripod. I removed the legs of the tripod and used the base to give my mount a gimble.

You'll notice that the print warped pretty badly in my print. This was mainly due to my shop being pretty too cold and possibly some air currents. Regardless, the warp has not affected the mount. It is working perfectly as intended.

Here is a video produced using the cameras mount. This was a particularly tall print. I could have adjusted the camera or position on the build plate, but didn't think about it at the time.