Tattoo Girl HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 180x240.06mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA eSun Beige Transmission Distance: 4.5
PLA PolyTerra Cotton White Transmission Distance: 1.5
This print uses 3 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #11 (0.96mm) swap to Beige
At layer #18 (1.52mm) swap to Cotton White for the rest.