Adjustable Apple TV Mount

This is an alteration of Sinfinity's Apple TV mount (https://www.thingiverse.com/thing:2603682)

The main difference is that I added three slots such that a moveable brace can be used to affix the mount to the top of your TV (as the width may vary) instead. I'd suggest using wood screws here so that they will dig into the pilot holes (the brace is held in place by the tension of the screws). I've also beefed up to thickness of this mount but would still recommend NOT using PLA due to its tendency to warp under loading.

If you want to use the clip (not required) it will need glue to be affixed to the mount (it helps keep the Apple TV from sliding out). Also, I'd recommend using adhesive-backed foam tape to create a cushion at the contact points of the TV.

This solution works best for square-backed TV's although it seems like many of them have a tapered reverse-side :(

Category: Tool Holders & Boxes