Brackets and Pegs for 3D printable Rack

Some connection accessories for the 3D printable rack.
3
19
0
70
updated February 1, 2025

Description

PDF

A collection of brackets and M5 pegs to expand and reinforce your 3D printable rack system.

This model is part of a series of accessories for my 3D printable rack system. You can check the other models here:

Do you like my models? Consider buying me a coffee ;)

Assembly instructions

Pegs

You can use the M5 3D printable pegs to join two rails together and make a taller rack. You will need one peg for every pair or rails.

To install it, follow the instructions below.

  • Insert the peg into one of the rail M5 holes.
  • Push the other rail against the other end of the peg. Then press the rails against each other until the peg is fully inserted on both.
  • Make sure everything is correctly aligned.
  • For better results, also use the 3D printed brackets.
Brackets

The brackets can be used to reinforce the connection between rails. To install them, please follow the instructions below.

  • Align both rails, and place the bracket on top of them.
  • Insert 2x M5x20mm screws in the bracket. And also insert 2x M5 hex nuts on the back of the rails.
  • Fully insert the M5 screws, and you're done!

Print Settings

Rafts:

Doesn't Matter.

Supports:

No.

Walls/Perimeters:

At least 3.

Resolution:

0.2 or 0.24

Infill:

25% or more

Filament:

PLA/PLA+/PETG/ABS/ASA/Nylon

Tags



Model origin

The author marked this model as their own original creation.

License