Goku Kid on Kinton nimble. The image is taken from the original Manga.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 106.67x160mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Jade White for the rest.
-----------
Please leave a rating or comment if you like the print!
Want to sell my prints? Commercial License is available here: https://patreon.com/asniaire
You can check out the rest of my designs here: https://www.printables.com/@asniaire
If you'd like to support my work, you can buy me a coffee :)
The author marked this model as their own original creation.