Stadia controller holder for the Honeycomb Storage Wall system.
Printing
2 wall loops with 0.2mm layer height on a 0.4mm nozzle works well. No Supports required.
Assembly
Insert an M3 threaded insert into the back of the body and screw the HSW insert onto the back of it with an M3 screw 8-10mm long.
Alternately, glue the HSW insert on to the back of the body.
The author remixed this model.
Remixed the SKADIS holder to allow an insert from the honeycomb storage wall can be attached to the back. There is a hole for an M3 threaded insert so that the HSW insert can be screwed on, alternately it could be glued together.