Samsung Wireless Charger Base Wedge

A wedge base that changes the viewing angle of the Samsung Charger (Model: EP-NG930).
1
3
0
27
updated February 1, 2025

Description

PDF

I designed a wedge base due to this charger (Model: EP-NG930) having too steep of an angle for my use case. While this charger is used for just that, ‘charging’, I also use it as a stand while watching training content or listening to music and wanted to do so without much glare from the overhead lights and to simply have an overall better viewing angle.

There are 4 recessed 12mm rubber feet holes. I used some rubber feet I've collected from Cisco network devices over the years, but you can get them from Amazon.

I've also included a model without these holes, so the bottom of the base is flat.


Software/Hardware/Materials I Used
--------------------------------------
Slicer: Cura 5.8+
Printer: Ender 3 Pro
Filament: Jayo Matte Gray PLA*


Print Parameters
---------------------
Nozzle Size: 0.4mm
Resolution: 0.2mm (Cura Standard Quality Profile)
Infill Density: 15-20%
Supports: Yes (Not Tested Without)


Additional Settings
------------------------
Experimental Fuzzy Skin: Enabled
Fuzzy Skin Thickness: 0.3mm
Fuzzy Skin Density: 1.25mm
Fuzzy Skin Distance: 0.6mm


Printed Model Details (Pictured)
----------------------------------------
I embedded an unamused emoji face to the inside of the base. The models provided are blank and do not have this detail.

 

*It seems to be an Inslogic copy, or an Amazon brand filament made by Sunlu. I've had no issues with this affordable matte gray filament.

Tags



Model origin

The author marked this model as their own original creation.

License