This is a device that holds cards that identify the filament stored in a 4
litres airtight container. This design is slightly curved to fit the end of
the container. The size of the cards are 42.3 mm x 76 mm, which corresponds to
a 1/3 of a 5 x 3 inches index card. A template that lets you print 3 cards per
index card is also included.
A brim is required. It should be printed upright without support. An infill of
20% is recommended.
This object's main web page is:
http://www.ctheroux.com/4-litres-airtight-container-filament-name-cardholder/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.
The author marked this model as their own original creation.