BTT HBB Keyboard skirt for Voron 2.4 300

A flat skirt for BTT HBB modified for voron 2.4 300
0
5
0
41
updated February 1, 2025

Description

PDF

I remixed falcon14141's model to fit my Voron 2.4 300. For all other parts, use the original design.

I moved the mounting holes, and they are not matching the original voron design location. The heat insert location however, which holds the bottom panel is at the voron designed location.

Note that the heat set insert slot is only 4mm deep, and even this cannot be printed without a small hole, but that's barely noticable.

This is only the right side, mirror it for left side. Also, I did not bother with the multicolor design from falcon, but it is easy enough to do a color change at layer.

Fusion360 design and step file included.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

The skirt is cut to fit Voron 2.4 300. The mounting holes are moved as well, with the lower heat insert slot following the official Voron placement.

License