Mount for desiccant box

This mount is specific to the design from @iD65_1537573 for the desiccant box at the 40 mm size. It is a pressure fit mount for easy removal to recharge the alumina crystals. 

I printed this with Prusament PC blend to allow for drying the desiccant without removing it from the container. The mount is printed in Jessie PETG. 

The link to the desiccant box and where my inspiration came from: https://www.printables.com/model/1119120-large-tall-rectangular-desiccant-container-box-wit

Printer

Printer model:  MK4SMMU3

Material

Filament type:  PETG

Filament used:  81.7 g / 26.75 m / 64.33 cm³

Bed temperature:  90 °C

Nozzle temperature:  245 °C

Print settings

Nozzle diameter:  0.4 mm

Layer height:  0.2 mm

Infill density:  15%

Support material:  no