This model was made for the pitbike Ayrton but might fit more motorcycles.
The hole pattern is specifically for my laptimer pzracing - start plus case.
Hardware requirements for installing on the handlebar:
4x m6 Barrel head 40mm
4x m6 nut with nylon
Specifications for usage:
There is a 3 hole pattern for M4 bolts / Guide pins.
Main hole for M8 bolt.
This handlebar bracket can be used for more applications.
Suggested printing:
ASA or any UV material are suggested but not must.
50% infill at least.
at least 3 perimeters because of the nut seatings.
Printing parts:
2x hbadapter-bottom-v1
1x hbadapter-top-final-v1
The author marked this model as their own original creation.