Planetary Gearbox 3 step 5x5x5=125x.. Problem with printer precision, perpendicular..+big forces
all gear should going freely in axle, better skratch all teeth too
then oil,
1unasac need support by 3d print
1
37
1
241
updated
February 16, 2025
Description
PDFThere is problem with big forces from friction in the end (or make bigger hole +0,5mm?)
if you have good printer maybe have you chance spin
without encap, it spine by me - forces ca 30N
Model origin
The author marked this model as their own original creation.
