GOEWS Wrench!

I give you GOEWS wrench!  While I really appreciated the GOEWS Tool and it is my goto, I wanted a wrench that could get into *most tighter spots. so I set about creating a wrench. I initially tried for a box wrench with one end open but I opted for two versions.  Not much different between either the original wrench or v2 other than one end's hole is rotated 45 degrees which may assist in a quick flip over to get the right position to continue loosening. Since the bolts don't have to be completely tight this is a great tool!

I did print this with 8 walls and 75% infill in a zig-zag pattern but grid would also be fine.  They turned out great. A bolt in one of the holes is all you need on the wall to hold the tool. I made the holes slightly larger in order to allow for any elephants foot that might happen when printing the bolts.

Part of the joy for me with the GOEWS system is installing the bolts!