Print-In-Place Snowball Mold

- Print-in-place, support-free design for making Snowballs! 
- Fairly quick print (3 hrs).  You need to be able to handle relatively tight clearances (0.30mm).
- If there is interest I will consider creating molds for more shapes!

This design is uploaded with a non-commercial license. Downloading this file does not grant you the right to sell commercially.

If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at
https://www.patreon.com/thinair3D

Printing Info:
These are just the settings I used to test the model, feel free to use whatever settings work best for you.
- FDM or Resin: FDM
- Scaling: Can be scaled up.  Scaling down may be fine to a certain degree, but will definitely cause issues with the print-in-place elements.
- Supports: None
- Infill/Perimeters: 10-15% infill + 2 wall loops
- Nozzle Size: 0.4
- Layer Height: 0.2
- Print Time: Approx 3 hours 4 mins (Bambu X1C)
- Filament Usage: Approx 83 grams (Bambu X1C)