Vancer Gretxa fingertip mouse frame 26g

This is a challenging print and will require supports to be tuned heavily for them to be removable while leaving clean bottom surfaces. I'd highly recommend that whatever material you use, get a gf/cf variant as supports will be much easier to separate. 

Bom:

Vancer Gretxa - https://www.amazon.com/dp/B0DBXMD3WH 

3.7v 150 Mah lipo battery - https://www.amazon.com/dp/B08215WQMQ

ESP Tiger Ice V2 skate dots (second smallest) - https://www.amazon.com/ESPTIGER-Gaming-Mouse-Skates-PTFE/dp/B0C9PTKBGB/ref=sr_1_3?sr=8-3

Vhb Tape (for the battery) - https://www.amazon.com/Mounting-Adhesive-Automotive-Waterproof-Industrial/dp/B0B4MTX8RQ/ref=sr_1_4?sr=8-4

!!!MAKE SURE TO EDIT PRINT SETTINGS OF THE .3MF!!! READ BELLOW

The 3mf includes support settings, painted supports on the part and strength settings that should be used but speed, quality, printer and filament settings should be personally tuned for the best results. I've slowed most speeds down but make sure to change the travel speed unless you can go 1m/s.

Modified to fit my grip better, be lighter weight and use the vancer gretxa pcb.