M2x8 SCREW AND NUT for K1 Extruder Filament Runout Sensor
I modified the original design because I only had regular M2 screws and nuts.
You'll need a M2x8 screw and M2 nut.
1
33
1
352
updated
January 30, 2025
Summary
PDFI modified the original design because I only had regular M2 screws and nuts.
You'll need a M2x8 screw and M2 nut.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Instead of using a self tapping 2mm screw it uses regular M2 screw and nut