Dupont Connector Sleeves - 4 Pins, 6 Pins, and 10 Pins

I found the original model and printed them to try with my Pimoroni Picade Max Aracde. When connecting them to a horizontal connector the sleeve would not allow the pins to fully connect. I also noticed that when connecting sleeves to groups of cables and connecting side by side they would not fit due to the ridge on the original model so I made the sides flush.

Also on the 4 and 6 pins models, I adjusted the inside dimensions for the connectors to fit more securely inside the sleeve. 

The depth of the original model is 12mm vs 15mm the shorter depth allows for side-mounted connectors. The sides of the sleeves are flush and have no ridge to allow connectors to be side by side with other sleeves.