CCG Deck Box with Geared Pivoting Lid

Summary

This is a gloriously over-complicated box for storing cards, or anything else really. As the lid is opened the platform rises, presenting the cards.

There are pre-layed-out plates! You can now select from 7 plates to greatly reduce the number of prints, but if you have trouble printing full-bed objects, or have a smaller printer, just grab the individual STL files and print those. The filename has either 1x or 2x to indicate how many to print.

The OpenSCAD file is fully customisable for the size of the compartment, and for some logos on the sides.

Latest source, stl's and scripts can be found in the GitHub Repository. There are also some scripts and tools to make re-generating this thing easier.

Instructions

There are 13 parts defined in the file that you need to print. There are also plated options to reduce that to 7 separate prints.

1x Front panel
1x Back Panel
1x Left
1x Right
2x Gear rack
1x Hinged lid (left)
1x Hinged lid (right)
2x Hinge mount
2x Mechanism holder
2x Top hinge
2x Side hinge
1x Platform
1x Base

Alternatively, print just ONE of each of these:
1x Plate A
1x Plate B
1x Plate C
1x Plate D
1x Plate E
1x Plate F
1x Plate G

Mostly the changes are just to make this more Customizer-friendly, but I have also removed the front/back panel decoration, and removed most of the CSG problems with the resultant STL files. Still need to clean a couple of parts up that are creating odd non-manifold files.

I have also added some options for generating pre-made plate layouts. Just print one of each of the "Plate" parts. These will automatically put the specified logos on each of the panels too.

I also redesigned the lid parts so that they can be printed in an orientation allowing the whole top to be the same finish.