Nintendo Switch Joycon Grip -Zelda Style

These switch grips are made for the OG and OLED types.  I do not believe they will fit the switch lite. 

Each grip prints in two parts. 

You need 4x M3x10mm screws or epoxy glue to attach them together. 

You could use both.  


Don't over tighten screws or it will strip the plastic.  If that happens, add a little super glue and screw it in, should help.  Or use a M4 with a pointy end. 

The housing file must be printed as it is oriented in the print stl file.  Otherwise the part that clips to the top will be weak and break. 

You will need to add support to the housing part.  I suggest using tree for easy removal.

I also highly suggest sanding the underside of the grip housing that makes contact with supports as it will be very rough.  If you don't have sand paper, a nail file will also work.  The roughness could possibly scratch your joycon housing so please give it a quick sanding.  I used 80 grit and it smoothed it out very quickly. 

I suggest printing the housing part in regular PLA or PETG.   Matte and silk are too weak for this part and it may break more easily.

These are a remix from another person's design.  https://www.printables.com/model/402105-separate-nintendo-switch-joy-con-grip
 

Changes I made:

I made the clip part thicker 

Added a texture to the grip in a Zelda style

Separated the part into two pieces for better print quality

Added a ridge to the clip part for easier removal

These grips will still allow the switch to be docked. 
These can also be used as a stand but it tips over very easily so use this feature at your own risk.

This model is a remix but I give the following permissions that align with the original creator's licensing.

You can:
Sell printed models (online or locally)
Create remix versions with attribution

Please don't:
Sell the model files
Claim the model as your own
Claim remixes as solely your own

Changes I made:

I made the clip part thicker 

Added a texture to the grip in a Zelda style

Separated the part into two pieces for better printing outcome

Added a ridge to the clip part for easier removal