100% Stand to 125% Enterprise E adapter

I printed @Martins incredible “Enterprise-E Sovereign Class” model at 125% scale and wanted to have a little adapter piece to have it perfectly sit on the 100% scaled stand.

The tolerances were tuned for my printer (Bambu Lab P1P) to have the adapter sit very firmly on the stand but have the Enterprise sit rather loosely to be able to pick it up. I also printed the Enterprise E with a 0.2mm nozzle and the stand with a 0.4mm nozzle. I'm not sure how well this will print on other setups, so maybe you need to tweak the tolerances as well by playing with the Inner_Tolerance and Outer_Tolerance values in Fusion.

No changes to the model itself, just an adapter piece for scaled prints.