Nooie Camera Bracket

This bracket will fit a Nooie Indoor Cam or Baby Cam (As of current models released in 2025, future releases may or may not be compatible)

Can be mounted on a vertical surface or used to hang the camera overhead

Any “m4” size screw or bolt should work with the default screw holes. Basically if the threads are 3-4mm (thicker is fine, you'll just need to thread it through your printed material) and the head is under 9mm in diameter you should be fine. I used Kreg Pocket hole pan head screws  with no issue

I completely started my model from scratch, but directly borrowed the size and shape from Whiteboy Funk's design.

Changes from the original:

Made the base thicker to allow screws to be countersunk

Added a second screw hole

increased size of the screw hole